 | Floor finish |  |
- Ecological alternative to traditional finishes
- Zinc FREE formulation
- Equivalent to standard finishes
- High shine
DIRECTIONS
- Remove old coatings with ENVIROLAB stripper (see detailed instructions on stripper container).
- Apply 3 medium and uniform coats (or more) of finish #85 using a clean finish mop. On porous or damaged resilient flooring, apply 2 coats of sealer prior to finishing.
- Allow 15 minutes after dry to touch between coats.
- Clean daily with ENVIROLAB 20 Neutral cleaner
REFINISHING
Dust mop entire floor. Apply a solution of ENVIROLAB cleaner 35 diluted 1 part for 32 parts of water. Let sit for 5 minutes then scrub entire surface with a low speed polisher equipped with a blue or green pad. Vacuum solution. Rinse thoroughly. Once dry, apply 2 coats of ENVIROLAB finish.
PACKAGING
Bottles contain between 40% and 50% of recycled material. Recycle whenever possible.
Boxes are made from 100% recycled cardboard. Recycle whenever possible.
BIODEGRADABILITY
This product and its biodegradation products are not toxic for the environment at the exception of the polymers and wax/resins used in the formulation that are not biodegradable.
EcoLogo is the only official ecological product certification of the Government of Canada which you can trust.
EcoLogo criteria: Biodegradable, safer for aquatic life, phosphate free, ecological surfactants, natural essential oils, non-carcinogenic, food coloring. Recycled and recyclable packaging.
www.ecologo.org
